Deutsche Industries Norm (DIN)

Sr. No

 DESCRIPTION DIN

Metrology and measurement in general
47 Rounding Radii DIN 250   1972-07                  
48 Preferred Numbers and Series of Preferred Numbers; Basic Values, Calculated Values, Rounded Values DIN 323-1  1974-08          
49 Preferred Numbers and Series of Preferred Numbers; Introduction DIN 323-2     1974-11       
50 Basic concepts in metrology-General concepts DIN 1319-1   1995-01      
51 Basic concepts in metrology; Terminology relating to the use of measuring instruments DIN  1319-2   1980-01      
52 Basic concepts in metrology-Evaluating measurements of a single measurand and expression of uncertainty DIN 1319-3  1996-05   
53 Basic principles for the design of line scales and pointers DIN 43790  1991-01                  
54 Accuracy (trueness and precision) of measurement methods and results-part1:Generral principles and definitions (ISO 5725-1:1994) DIN ISO 5725-1  1997-11
55 Accuracy (trueness and precision) of measurement methods and results; a basic method for the determination of  repeatability and reproducibility of a standard measurement method; identical with ISO/DIS 5725-2:1990 DIN ISO 5725-2    1991-02      
56 Accuracy (trueness and precision) of measurement methods and results;part3: intermediate measures on the precision of a test method DIN ISO 5725-3   1991-07   
57 Accuracy (trueness and precision) of measurement methods and results; basic  methods for estimating the trueness of a test method; identical with ISO/DIS 5725-4  :1990 DIN ISO 5725-4   1991-02           
58 Accuracy (trueness and precision) of measurement methods and results-Part 5: Alternative methods for the determination of the precision of a standard measurement  method (ISO/DIS 5725-5:1996) DIN ISO 5725-5    1996-09      
59 Accuracy (trueness and precision) of measurement methods and results; practical applications; identical with ISO/DIS 5725-6:1990 DIN ISO  5725-6    1991-02 
60 Quality assurance requirements for measuring equipment;part1:metrological confirmation system for measuring equipment; identical with ISO 10012-1:1992 DIN ISO 10012-1   1992-08          
61 Capability of detection-Part 2: Methodology in the linear calibration case (ISO/DIS 11843-2:1998) DIN ISO  11843-2   1998-08
Linear and angular measurements in general
62 Terminology used in dimensional metrology; Units, activities, checking instruments; Metrological concepts DIN 2257-1     1982-11     
63 Definitions of length Verification Practice: Measurement Errors and Uncertainties DIN 2257-2        1974-08       
Limits and fits 
64 ISO Systems of Limits and Fits; Testing of Work piece Elements with Cylindrical and Parallel Mating Surfaces DIN 7150-2     1977-08        
65 Recommended Selection of Fits; Tolerance Zones, Allowances, Fit Tolerances      DIN  7157     1966-01       
66 Relationship between tolerances of size, form, and parallelism; envelope requirement without individual indication on the drawing DIN 7167       1987-01         
67 General tolerances for linear and angular dimensions and geometrical tolerances (not to be used for new designs) DIN 7168           1991-04           
68 Tolerances and limit deviations for sizes above 3150mm up to 10000mm; principles standard tolerances and limit deviations DIN 7172     1999-04        
69 GPS-Geometrical tolerancing-Positional tolerancing (ISO 5458:1998) DIN EN ISO 5458  1999-02         
70 Geometrical product specifications (GPS)-inspection by measurement of work-pieces and measuring equipment -Part 1: Decision rules for proving conformance or non-conformance with specifications (ISO 14253-1:1998) DIN EN ISO 14253-1   1993-03    
Measuring instruments
71 ISO metric trapezoidal screw threads, gauging of external and internal threads, gauge dimensions and design features DIN 103-9     1985-02  
72 Metric taper external and mating internal parallel screw thread-Gauges and gauging DIN 158-2     1997-06      
73 Vernier-capllipers;requirements and testing DIN 862        1988-12    
74 Micrometers-Standard design external micrometers-Concepts, requirements and testing DIN 863-1      1994-04     
75 Micrometers-Fixed micrometers and depth micrometers-Concepts, requirements and testing DIN 863-2     1999-04        
76 Micrometers-Special design external micrometers-Design, requirements and testing DIN 863-3     1994-04                 
77 Micrometers-Internal micrometers-Concepts, requirements and testing DIN 863-4    1994-04         
78 Graduated steel rules; Rules for verification purposes, Requirements DIN 865       1983-03         
79 Graduated steel rules; Engineer's rules; Design, requirements DIN 866        1983-03           
80 Steel Straight Edges; Dimensions, Technical conditions of Delivery DIN 874-1     1973-08      
81 Knife Edges; Dimensions, Technical Conditions of Delivery DIN 874-2       1973-08      
82 90° steel squares DIN 875        1981-03       
83 Inclination measuring instruments (levels) DIN 877     1986-06      
84 Dial gauges DIN 878         1983-10        
85 Gauges for use in dimensional metrology-Requirements and testing DIN 2239       1995-01        
86 Gauge handles for gauging members up to 40mm nominal diameter with 1:50 taper shank DIN 2240-1       1989-11        
87 Gauge handles for gauging members over 40mm nominal diameter ;handles, fixing screws and locking prongs DIN 2240-2       1989-11       
88 Gauge handles for gauging members for use in precision engineering DIN 2240-3    1989-11       
89 NOT GO gauging members from 1mm up to 40 mm nominal diameters DIN 2249-1     1989-11       
90 General -purpose Go ring gauges and setting ring gauges for pneumatic length measuring instruments from 1mm up to 315 mm nominal diameter DIN 2250-1      1989-11       
91 Go ring gauges and setting ring gauges  from 1mm  to 315 mm, for use in precision engineering DIN 2250-2      1989-11        
92 General purpose Not Go ring gauges with nominal diameters from 1mm to 315 mm, DIN 2254-1      1995-01     
93 Not Go ring gauges with nominal diameters from 1 mm to 315mm, for use in precision engineering DIN 2254-2     1995-01     
94 Length Measurements with Graduations; Parameters, tolerancing DIN 2268      1975-10      
95 Lever gauges DIN 2270       1985-04    
96 Pneumatic Length Measurement (Air Gauging); Principles, Methods DIN 2271-1       1976-09       
97 Pneumatic Length Measurement (Air Gauging); Design Features of Instruments working the High Pressure Range  DIN  2271-2    1976-04       
98 Pneumatic Length Measurement (Air Gauging); Parameters of Instruments Working in the High Pressure Range, Requirements, Testing DIN 2271-3    1976-11       
99  Pneumatic Length Measurement (Air Gauging); General information and Examples of Application DIN 2271-4    1977-11
100 Inspection equipment used in dimensional metrology; requirements; auxillary measuring devices DIN 2272-1   1985-08 
101 Sine bars DIN 2273   1979-05
102 Inspection vee-blocks; designs, requirements DIN 2274   1981-10
103 Feeler Gauges DIN 2275   1977-09
104 Inclination measuring systems; cylindrical spirit level vials; dimensions and requirements DIN 2276-1   1986-06 
105 Inclination measuring systems; electronic inclination measuring systems; types and requirements DIN 2276-2   1986-06
106 Circular Levels; Terms,Construction DIN 2277       1967-11
107 Dirt Grooves on Screw Thread Gauges for screw Threads with ISO Metric Profile DIN 2278       1967-12
108 GO and NOT GO screw plug gauges for ISO metric screw threads from 1mm up to 40 mm nominal diameter DIN 2280       1989-11 
109 GO workshop screw plug gauges, check plugs and setting plugs for ISO metric screw threads over 1 mm up to 40 mm nominal diameter DIN 2281-1     1989-11
110 GO workshop screw plug gauges, check plugs and setting plugs for ISO metric screw threads over 40 mm up to 200 mm nominal diameter DIN 2281-2     1989-11
111 GO workshop screw plug gauges, check plugs and setting plugs for ISO metric screw threads over 40 mm up to 250 mm nominal diameter for use in precision engineering DIN 2281-3      1989-11 
112 GO  screw gauging members for workshop  plug gauges, check plugs and setting plugs for ISO metric screw threads over 1 mm up to 40 mm nominal diameter DIN 2282-1      1989-11
113 GO  screw gauging members for workshop  plug gauges, check plugs and setting plugs for ISO metric screw threads over 40 mm up to 200 mm nominal diameter DIN 2282-2      1989-11
114 GO  screw gauging members for workshop  plug gauges, check plugs and setting plugs for ISO metric screw threads over 40 mm up to 250 mm nominal diameter for use in precision engineering DIN 2282-3       1989-11
115  NOT GO workshop screw plug gauges, check plugs and setting plugs for ISO metric screw threads over1 mm up to 40 mm nominal diameter DIN 2283-1      1989-11
116 NOT GO workshop screw plug gauges, check plugs and setting plugs for ISO metric screw threads over 40 mm up to 200 mm nominal diameter DIN 2283-2       1989-11
117 NOT GO workshop screw plug gauges and check plugs for ISO metric screw threads over 40 mm up to 200 mm nominal diameter for use in precision engineering DIN 2283-3      1989-11
118 NOT GO  screw gauging members for workshop  plug gauges, check plugs and setting plugs for ISO metric screw threads from 1 mm up to 40 mm nominal diameter  DIN 2284-1      1989-11
119 NOT GO  screw gauging members for workshop  plug gauges, check plugs and setting plugs for ISO metric screw threads over 40 mm up to 200 mm nominal diameter  DIN 2284-2      1989-11
120  NOT GO  screw gauging members for workshop  plug gauges, and check plugs and setting plugs for ISO metric screw threads over 40 mm up to 200 mm nominal diameter  DIN 2284-3     1989-11
121 General purpose GO screw ring gauges for ISO metric screw threads from 1mm up to 200 mm nominal diameter DIN 2285-1      1989-11
122 Go screw ring gauges  for ISO metric screw threads over 50 mm to 200 mm nominal diameter for use in precision engineering DIN 2285-2      1989-11
123 General purpose  NOT GO screw ring gauges for ISO metric screw threads with nominal diameter from 1mm up to 200 mm  DIN 2299-1     1995-01
124 NOT Go screw ring gauges  for ISO metric screw threads with nominal diameters from  50 mm to 200 mm  for use in precision engineering DIN 2299-2     1995-01
125 Pipe  threads for tubes and fittings; sizes for taper screw limit plug gauges for parallel internal threads DIN 2999-4     1986-11
126 Whitworth pipe Threads for Tubes and Fittings; Cylindrical Screw Limit Ring Gauges for Gauging Conical External Threads , Sizes DIN 2999-5     1973-08
127 Whitworth pipe Threads for Tubes and Fittings; Conical Screw Check plugs, Sizes DIN 2999-6     1975-01
128 Measuring Tapes pf Steel with Winder Frames or Winder Cases DIN 6403       1976-02
129 Plain workshop and Inspection Gauges; Manufacturing Tolerances And Permissible Wear DIN 7162       1965-12
130 Workshop Gap Gauges and Check Gauges for ISO Fit Sizes from 1 to 500 mm Nominal Dimensions  Nominal Dimensions and Manufacturing Tolerances DIN 7163      1966-08 
132 Workshop Plug Gauges And Spherical End Measuring Rods for ISO Fit Dimensions  from 1 to 500 mm Nominal Dimensions; Gauge Dimensions and Manufacturing Tolerances DIN 7164       1966-08
133 Non-contact opto-electronic length measurement-Concepts, requirements and testing DIN 32877       1992-02
134 Steel Conduit Thread; Thermal Gauges, "Go" and "Not go" Thread Ring Gauges DIN 40431-1      1970-11 
135 Steel Conduit Thread; Thermal Gauges, "Go" and "Not go" Thread Plug Gauges DIN 40431-2       1972-11
136 Tensile testing pf metallic materials-Verification of extensometers used in uni-axial testing DIN EN 10002-4     1995-01
137 Tensile testing of metallic materials Part4:-Verification of extensometers used in uni-axial testing-Examples for extensometers and their verification DIN EN 1002-4 Suppl1    1995-01 
138 GPS-Surface texture: profile method-Nominal characteristics of contact (stylus) instruments (ISO 3274:1996) DIN EN ISO 3274      1998-04
139 Geometrical product specification (GPS)-Length standards-Gauge blocks (ISO 3650:1998) DIN EN ISO 3650    1999-02 
140 Dimensional measuring instruments-Requirements on inspection equipment in dimensional metrology-Limits of permissible error of measuring instruments (ISO/CD 14978:1995)    DIN ISO 14978      1996-07
141 TORQ-SET recesses; Penetration gauges LN 29999-2      1974-08

Back

 Home Next